Customer Feedback
We want to hear from you! Give us your feedback and you could WIN some Go Power! gear. Prizes awarded monthly.
Regulate the flow of charge to your batteries with this flush-mounted 10 amp controller. This page is for information purposes only. This product is no longer available for purchase.
The Go Power! 10 amp Flush-Mounted Solar Controller regulates flow from the solar panels to the battery and prevents overcharging and optimizes battery lifespan.
Nominal System Voltage |
12V |
Max Solar Array Current |
10A |
Battery Voltage Range |
6V — 15.5V |
Max. Solar panel input voltage |
28V |
Operating Consumption |
6mA |
Display Consumption |
10mA |
Temp. Compensation |
-13mV/ºF / – 24mV/ºC |
Operating Temperature |
– 40 to 185ºF / – 40 to 85ºC |
Humidity |
99% N.C. |
Dimensions (H x W x D): |
5.87 x 3.86 x 1.26 in; 149 x 98 x 32 mm |
Weight |
9.2 oz; 260 grams |
Maximum Wire Gauge: |
#4 AWG |
Warranty |
5 year |
Protection |
Battery Reverse Polarity, Solar Array Reverse Polarity, Over temperature, Over Current |
Rated |
IP50 |
BATTERY SETTINGS |
Sealed/GEL |
AGM |
Flooded |
LiFePO4 |
Bulk Charge Voltage Set Point |
14.1V |
14.4V |
14.7V |
14.4V |
Absorption Charge Voltage (30 min / day) Automatic boost charge applied for 2hr if battery voltage drops below 12.3V |
14.1V |
14.4V |
14.4V |
14.4V |
Float Charge Voltage |
13V |
13V |
13V |
14V |
Equalize Charge Voltage (2h / 28 days or after V < 12.1V) |
Disabled |
Disabled |
15V |
Disabled |