PRODUCT DETAILS
The Go Power! GP-PWM-30-SQ is a 30A, 12V PWM solar charge controller for RV solar systems. It protects your battery from overcharging with five-stage, temperature-compensated charging, and it has six battery profiles: LiFePO4, LTO, Gel, AGM, Wet and Calcium. AGM is the default; hold the Battery Type button for three seconds to change it.
Final stock
This controller is discontinued. We have a limited number left and will not be getting more. The current 30A controllers are the GP-SB-ECO-PWM-30 and the GP-SB-PWM-30-BT with Bluetooth.
Replacing the same controller?
If your RV already has a GP-PWM-30-SQ, this is a like-for-like swap: same faceplate, same cut-out, same wiring.
Install notes
Mount it indoors on a vertical surface, as close to the battery as practical. The combined maximum power current (Imp) of the array must stay at or under 30A and the open-circuit voltage at or under 25V, which means 12V-nominal panels wired in parallel. Fit a fuse or breaker of no more than 30A on the positive wire of both the solar and battery circuits. Connect the battery before the solar array, and set the battery type before use.
FEATURES
- 30A PWM, 12V — for 12V-nominal solar panels wired in parallel.
- 6 battery profiles: LiFePO4, LTO, Gel, AGM (default), Wet and Calcium.
- 5-stage charging with temperature compensation and an optional monthly equalize for Wet and Calcium batteries.
- Backlit LCD shows battery voltage, charging current and state of charge.
- Two buttons: Volt/Amp to cycle the display, Battery Type to choose the profile.
- Protection: reverse polarity, short circuit, over-temperature, transient over-voltage; no reverse current at night.
- 1-year warranty.
WHAT IT RUNS
SPECIFICATIONS
| Model / Item | GP-PWM-30-SQ / 82685 |
|---|---|
| Nominal system voltage | 12 V |
| Charge current | 30 A continuous |
| Normal solar input voltage | 15–22 V DC |
| Max solar array voltage | 25 V DC (open circuit) |
| Lowest operating voltage | 8 V |
| Battery profiles | LiFePO4, LTO, Gel, AGM (default), Wet, Calcium |
| Absorption voltage at 25 °C | 14.0 V LTO; 14.1 V Gel; 14.4 V AGM and LiFePO4; 14.7 V Wet; 14.9 V Calcium |
| Float voltage at 25 °C | 13.6 V Gel, AGM, Wet, Calcium; 13.4 V LTO; 14.0 V LiFePO4 |
| Equalize | 15.5 V for 2 hours, every 28 days; Wet and Calcium only |
| Temperature compensation | −24 mV/°C |
| Voltage accuracy | ±1% |
| Operating temperature | −20 to 50 °C (−13 to 122 °F) |
| Terminal torque | 16 in-lb (1.8 N·m) |
| Dimensions (H × W × D) | 6.14 × 4.80 × 1.50 in (156 × 122 × 38 mm) |
| Mounting | Vertical wall mounting, two screws included |
| Compliance | RoHS |
| Warranty | 1 year |
COMPARE MODELS
MANUALS, SAFETY INFORMATION AND DOWNLOADS
ACCESSORIES
FAQ
Will you get more of these?
No. This model is discontinued and what we have is the last of it. The current 30A controllers are the GP-SB-ECO-PWM-30 and the GP-SB-PWM-30-BT.
Will it charge lithium batteries?
Yes. Hold the Battery Type button for three seconds and select LiFePO4.
How much solar can I connect?
Up to 30A of panel current on a 12V system, with the array's open-circuit voltage at or under 25V. Use 12V-nominal panels wired in parallel.
Does it have Bluetooth?
No. For app monitoring, choose the GP-SB-PWM-30-BT.
What's the warranty?
1 year.