Go Power

Sort By:

Products

Showing 133–144 of 158 results

  • GP ISW

    700 watt Industrial Pure Sine Wave Inverter

    A versatile performer for your mid-range power needs, the Go Power! GP-ISW700 industrial pure sine wave inverter is a powerful yet economical choice. Widely used in fleet truck applications, the GP-ISW700 is available with 12 or 24-volt input. A good choice for powering electronic equipment like TVs, stereos, computers and most medium-load electrical equipment, the Go Power! GP-ISW700 is suitable for a range of applications.

  • CTI  Mono

    80 watt Solar Module

    80 watt Solar Module panel in a rigid, aluminum frame.

  • 800 Watt Heavy-Duty Modified Sine Wave Inverter

    A versatile performer for your mid-range power needs, the Go Power! GP-800HD heavy-duty modified sine wave inverter is powerful yet economical. Easy to install, connect the inverter directly to your battery, and then plug your appliances into its two AC outlets. Use the GP-800HD to power lights, drills, blenders and more.

    When you’re not using it, you can switch it off to conserve power. Ideal for powering kitchen appliances, or as a source of emergency back-up power, the GP-800HD fits a range of applications.

  • GP RV E side e

    95 watt Solar Module

    95 watt Solar Module. This page is for information purposes only. This product is no longer available for purchase.

  • Adjustable Mount for Rigid Solar Panels

    Adjustable Mount for Rigid Solar Panels allows you to adjust the tilt of your solar panels once they are installed on the rooftop.

  • GPC  AUTO no handle

    Automotive Power Supply Charger

    Automotive Power Supply Charger supplies and recharges batteries during vehicle maintenance, complex service reflash and showroom demonstrations.

  • Cable entry plate

    Cable Entry Plate

    With the Cable Entry Plate, installation is cleaner and more flexible. The Go Power! Cable Entry Plate provides a tidy wire configuration for rooftop solar installation, protects the cable connections and helps prevent roof leaks.

    With Go Power’s Cable Entry Plate, run the wires through any part of the roof you choose, ideally as close as possible to the battery for the most efficient charging and minimizing energy loss. This product has been designed from the ground up to provide the best solution on the market for a cable entry port for RV rooftops.

  • IC  Series on its own

    IC Series 3000-watt Inverter Charger

    Go Power!’s IC Series 3000-watt Inverter Charger offers more power in the same footprint. An inverter, battery charger and transfer switch in one compact unit. The Go Power! 3000-watt Inverter Charger delivers top features and performance at an economical price. The GP-IC-3000 has a compact footprint that saves space and simplifies installation – there are fewer components and cables to install!

    The two 50 amp legs set its performance apart from common 50 amp inverter chargers. The configuration allows users to make full use of a 100 amp shore power service (240V) by passing through up to 12,000 watts of power! It is also compatible with all 30 amp services.

    Included in the 600-watt Solar Extreme charging system.

  • IC  Series on its own

    IC Series 2000-watt Inverter Charger

    Go Power!’s IC Series 2000-watt Inverter Charger is an inverter, battery charger and transfer switch in one compact unit. The inverter charger is a 3-in-1 system combining an inverter, battery charger and automatic transfer switch. This saves space and simplifies installation by reducing the number of devices and cables to install.

    While most inverter chargers offer a 30 amp transfer switch, the IC2000 provides two 50 amp legs. That means when connected to shore power 50 amp service (240V), you can draw up to 12,000 watts of power! The IC2000 is also compatible with 30 amp service.

    The IC2000 includes a battery temperature sensor on a 25′ cable. One end mounts onto your battery and the other end plugs into the inverter charger. The temperature data is sent to the IC2000 which automatically adjusts voltage to maintain proper and healthy charging.

    Included in the 400-watt Solar Elite charging system.

  • Industrial Pure Sine Wave Inverter Remote

    Works with all Go Power! industrial pure sine wave inverters.

  • Inverter Charger Remote

    Conveniently monitor and control your IC series inverter/charger with an easy-to-read, 4 line digital display panel. Digital display and menus offer simple operation and use while providing detailed operational data about your inverter charger. This product comes with IC-2000 and IC-3000 packages, and is also included in the 400-watt Solar Elite and 600-watt Solar Extreme charging systems

  • Inverter Fuse & Block

    Inverter Fuse & Block

    Protect yourself and your equipment by installing Go Power!’s extra heavy-duty, DC-rated fuse blocks. Kits include mounting block, fuse, and protective cover. Inverter Fuse Blocks (FBL) include an insulated polyester reinforced polycarbonate base and include 5/16″ studs or optional universal terminal lugs as well as a transparent protective cover.

Solar

Complete Solar and Inverter
Charging Systems

Inverters

Complete Solar and Inverter
Charging Systems

Batteries
& Power Accessories

Customer Feedback

We want to hear from you! Give us your feedback and you could WIN some Go Power! gear. Prizes awarded monthly.    

Need Some Help?

Get a hand from a Go Power! team member.

Having trouble finding your ideal mobile power solution? Fill in the form below to contact a Go Power! team member. We're more than happy to help.

  • By using this form you imply consent for a member of our Customer Service, Sales, and Technical Support teams to contact you regarding your inquiry. You may also receive an express consent notification to opt-in to our newsletter.
  • This field is for validation purposes and should be left unchanged.