PRODUCT DETAILS
Bring rooftop solar wiring into your RV through a clean, sealed entry point instead of the fridge vent. The Go Power! cable entry plate mounts flat on the roof. Your panels' solar connector (SC) leads plug into the two SC ports on top, and pre-attached red and black wires run down through the roof to your charge controller.
Pick the lead length that fits your install: short 10 in leads (10 AWG or 8 AWG) for a controller or junction right below the roof, or 7 ft, 10 ft or 25 ft 10 AWG leads to reach a controller farther away. Mount it as close to the batteries as you can to keep wire runs short.
Features
- Two solar connector (SC) ports for positive and negative
- Jam-nut threads locked for vibration resistance
- Smooth underside for a die-cut adhesive seal
- Flexible UL3173 interior wires for easier routing
- Integrated cable-tie strain relief protects the wires from the edge of the drilled hole
Choose your leads
| Option | Part number | Item # |
|---|---|---|
| 10 in leads (10 AWG) | GP-CEP-PM-1 | 83189 |
| 10 in leads (8 AWG) | GP-PP-CEP-1-8G | 83786 |
| 7 ft leads (10 AWG) | GP-CEP-PM-7 | 83191 |
| 10 ft leads (10 AWG) | GP-CEP-PM-10 | 83192 |
| 25 ft leads (10 AWG) | GP-CEP-PM-25 | 83193 |
Dimensions
Plate: 5.31 in × 4.41 in. Mounting holes: 4.57 in × 3.66 in on center.