PRODUCT DETAILS
The Go Power! SSW-R puts the on/off switch for your Smart Sine Wave (SSW) inverter or Advanced Inverter/Charger (AIC) where you can reach it. Mount the wall plate in a cabinet, at the entry door or next to the breaker panel, run the 25 ft cable to the inverter, and switch the inverter on and off without opening the battery bay.
Simple install
Cut a 1 in (25 mm) hole, feed the cable through and fasten the plate with the included screws. At the inverter, the wires push into the remote terminals next to the power button — the ends are pre-stripped and the switch is non-polarized, so either wire goes in either terminal.
Works with SSW and AIC
The SSW-R is the remote for every Go Power! Smart Sine Wave inverter and every Advanced Inverter/Charger. Operation differs slightly between the two — see the Power On/Off section of your inverter's manual. Using an ASW inverter? Choose the ASW-R. Want settings and status as well as on/off? Add a PowerTrak™ display.
FEATURES
- Remote ON/OFF rocker switch on a wall plate.
- 25 ft (7.6 m) cable, pre-stripped, non-polarized.
- Push-in terminals at the inverter.
- Mounts in a 1 in (25 mm) hole; screws included.
- Compatible with all SSW inverters and AIC inverter/chargers.
WHAT IT RUNS
SPECIFICATIONS
| Model / Item | SSW-R / 83724 |
|---|---|
| Type | Remote ON/OFF switch |
| Dimensions | 2.7 × 1.9 × 1.0 in |
| Cable | 25 ft (7.6 m), pre-stripped, non-polarized |
| Mounting | Wall plate, 1 in (25 mm) hole, screws included |
| Compatible with | Smart Sine Wave inverters (SSW-1500-12, SSW-1800-12-HW, SSW-2000-12, SSW-2000-12-HW, SSW-3000-12-HW); Advanced Inverter/Chargers (AIC-2000-12-SL, AIC-3000-12-SL, AIC-3000-12-DL) |
COMPARE MODELS
MANUALS, SAFETY INFORMATION AND DOWNLOADS
ACCESSORIES
FAQ
Which inverters does the SSW-R work with?
All Go Power! Smart Sine Wave (SSW) inverters and Advanced Inverter/Chargers (AIC). ASW inverters use the ASW-R; ISW inverters use the GP-ISW-R or GP-SWR-A.
How long is the cable?
25 ft (7.6 m), with pre-stripped ends that push into the inverter's remote terminals.
Does it matter which wire goes to which terminal?
No. The switch is non-polarized.
Does it show battery or inverter status?
No, it's an on/off switch. For status and settings, add a PowerTrak™ display.