100Ah Lithium Iron Phosphate Solar Battery
Go further off-the-grid with the new Go Power! 100ah Lithium Iron Phosphate solar battery. Built specifically for mobile applications, this deep cycle battery is ideal for life on the road.
Lithium technology offers a lightweight, safe alternative to traditional batteries, giving almost double the usable capacity of Lead Acid. The GP-LIFEPO4-100 provides 100 amp-hours of DC power. Use on its own or connect up to four together to build a powerful battery bank.
Applications
Buying Options
Quick Links
100Ah Lithium Iron Phosphate Solar Battery
GP-LIFEPO4-100
Go further off-the-grid with the new Go Power! 100ah Lithium Iron Phosphate solar battery. Built specifically for mobile applications, this deep cycle battery is ideal for life on the road.
Lithium technology offers a lightweight, safe alternative to traditional batteries, giving almost double the usable capacity of Lead Acid. The GP-LIFEPO4-100 provides 100 amp-hours of DC power. Use on its own or connect up to four together to build a powerful battery bank.
Applications
Buying Options
Quick Links
Product Overview
MODEL: GP-LIFEPO4-100
Key Benefits:
- Compatible with all Go Power! solar, inverters and charge controllers
- Max Power Capacity; carries almost double the power of regular batteries
- Lightweight
- Quick charging
- Built-in Battery Management System (BMS)
- Over and under voltage protection
- Over and under temperature protection
- Charge and discharge over current protection
- Short circuit protection
- Drop-in replacement for Group 31 Lead Acid or AGM batteries
- 10-year warranty
Safety Features:
Go Power! Lithium batteries feature a built-in Battery Management System (or, BMS) which ensures safety and long battery life by constantly monitoring battery performance, internal temperature, and other critical elements required in safely functioning battery.
Go Power! LiFePO4 Lithium batteries feature several safety components in the BMS, which Include:
- Over and under voltage protection, which disconnects the battery from the load or charger, to prevent damage if it occurs
- Over and under temperature protection, which also disconnects from the load if the temperature limits are exceeded
- Charge and discharge over current protection, which automatically balances the voltages during recharge cycles to bring all the battery cells to full charge at the same time, ensuring longer battery life.
- Short circuit protection, which open circuits the battery terminals if a short is detected
Product Specifications
SPECIFICATIONS |
|
|
Technology |
Lithium Iron Phosphate |
|
Nominal Voltage |
12.8 V |
|
Rated Capacity |
100Ah |
|
Nominal Operating |
77 ±5 °F (25 ±3 °C) |
|
Maximum Charge Voltage |
14.6 VAC |
|
Charge Cut-off Voltage |
14.6 VAC |
|
Discharge Cut-off Voltage |
8.4 VAC |
|
Recommended Charge Current |
50A |
|
Maximum Charge Current |
100A |
|
Maximum Discharge Current |
100A (continuous); 120A (30 minutes); 150A (5 seconds) |
|
Over-charge Protection Voltage |
14.6V |
|
Internal Resistance |
≤ 7.5 mΩ |
|
Over-charge Protection Voltage of a single cell |
2.1V |
|
Maximum Temperature Protect Charge |
32°F (0°C) to 131°F (55°C) |
|
Maximum Discharge Temperature Range |
-4°F (-20°C) to 131°F (55°C) |
|
BMS Leakage Current |
≤3mA |
|
Operating Temperature |
Charge: 32°F (0°C) to 131°F (55°C) |
|
Discharge: -4°F (-20°C) to 131°F (55°C) |
|
|
Storage Temperature |
1 Week: -4°F (-20°C) to 122°F (50°C) |
|
1 month: -4°F (-20°C) to 113°F (45°C) |
|
|
6 months: -4°F (-20°C) to 104°F (40°C) |
|
|
Humidity |
Operating: 5% to 90 % RH Storage: 45% to 85% RH |
|
Certifications |
UN 38.3; CE |
|
Cycle Life |
≤1500 @ 100% Depth of Discharge; ≥3000 @ 80%; ≥4500 @ 30% |
|
Product Warranty |
10-year (Prorated) |
Dimensions & Other Specs |
|
|
Length |
12.9 in / 328 mm |
|
Width |
7 in / 178 mm |
|
Height |
9.2 in / 233.7 mm |
|
BCI Group # |
31 |
|
Weight |
36 lbs / 16.33 kg |
|
Carrying |
Nylon Straps |
Materials |
|
|
Case and Cover |
ABS |
|
Active |
LiFePO4 |
|
Venting Valve |
Rubber, opening pressure 8-20kPa |
Lithium Iron Phosphate batteries ship under Class 9 Dangerous Goods PI 965 Section IA, which requires special carrier
instructions. Please contact your carrier company to determine their requirements for shipping.
MSDS Sheets are available upon request.
Safety Precautions
Do not wire in series.
Maximum 4 batteries per bank in parallel.
Only suitable for 12-volt applications.
Do not get wet.
FAQ & Support
+ - Can these be used as starting batteries?
No, they are not suited to be used in this application.
+ - Are there any wiring restrictions?
Yes. You can not wire more than 4 of these batteries in parallel. These batteries cannot be wired in series.
+ - What does LiFePO4 stand for?
LiFePO4 stands for Lithium Iron Phosphate, this is the chemistry of our 12 volt lithium batteries
+ - What is the recommended Depth of Discharge for these batteries?
To increase the longevity of the battery, we recommend to discharge no lower than 20-30% regularly.
+ - Is a battery kill switch for winter storage?
No, there is no need to add a kill switch.
+ - Do lithium batteries need to be taken out for the winter or can they be left in the trailer/RV? (Will they freeze?)
It is recommended to take the lithium batteries out like any deep cycle battery. Lithium batteries do not like cold temperatures. They will not take a charge below 0 degrees and like any battery they can freeze at one point.
+ - Do lithium batteries go dead from sitting while stored?
Lithium batteries will discharge over time like any battery but they do it at a much slower rate. We recommend giving them a quick charge every couple of months and to keep them in peak condition.
+ - How do you charge a lithium battery in cold or warm weather?
It is better to charge lithium batteries in warmer temperatures. Lithium batteries will not accept charge at freezing or below. The charging temperature range on our batteries is 32°F (0°C) - 131°F (55°C)
+ - What settings are used on the inverter/charger for the lithium batteries?
Use the custom battery charger setting on the Inverter/Charger units. See the instructions below for more info. IC Series Go Power Lithium Battery Set Up: Go to Unit Setting and hit enter; Scroll to Final Charge and hit enter; Scroll to set to Float and hit enter; Scroll through unit setting to battery type and hit enter; Scroll to Custom and hit enter; Set absorption to 14.4VDC and hit enter; Set Float to 14.1VDC and hit enter; Set equalize to 14.1VDC and hit enter; You are now set for charging Go Power 12 volt lithium batteries.
Product Documents
Product Support Resources
MODEL: GP-LIFEPO4-100
Key Benefits:
- Compatible with all Go Power! solar, inverters and charge controllers
- Max Power Capacity; carries almost double the power of regular batteries
- Lightweight
- Quick charging
- Built-in Battery Management System (BMS)
- Over and under voltage protection
- Over and under temperature protection
- Charge and discharge over current protection
- Short circuit protection
- Drop-in replacement for Group 31 Lead Acid or AGM batteries
- 10-year warranty
Safety Features:
Go Power! Lithium batteries feature a built-in Battery Management System (or, BMS) which ensures safety and long battery life by constantly monitoring battery performance, internal temperature, and other critical elements required in safely functioning battery.
Go Power! LiFePO4 Lithium batteries feature several safety components in the BMS, which Include:
- Over and under voltage protection, which disconnects the battery from the load or charger, to prevent damage if it occurs
- Over and under temperature protection, which also disconnects from the load if the temperature limits are exceeded
- Charge and discharge over current protection, which automatically balances the voltages during recharge cycles to bring all the battery cells to full charge at the same time, ensuring longer battery life.
- Short circuit protection, which open circuits the battery terminals if a short is detected
Product Specifications
SPECIFICATIONS |
|
|
Technology |
Lithium Iron Phosphate |
|
Nominal Voltage |
12.8 V |
|
Rated Capacity |
100Ah |
|
Nominal Operating Temperature |
77 ±5 °F (25 ±3 °C) |
|
Maximum Charge Voltage |
14.6 VAC |
|
Charge Cut-off Voltage |
14.6 VAC |
|
Discharge Cut-off Voltage |
8.4 VAC |
|
Recommended Charge Current |
50A |
|
Maximum Charge Current |
100A |
|
Maximum Discharge Current |
100A (continuous); 120A (30 minutes); 150A (5 seconds) |
|
Over-charge Protection Voltage |
14.6V |
|
Internal Resistance |
≤ 7.5 mΩ |
|
Over-charge Protection Voltage of a single cell |
2.1V |
|
Maximum Temperature Protect Charge |
32°F (0°C) to 131°F (55°C) |
|
Maximum Discharge Temperature Range |
-4°F (-20°C) to 131°F (55°C) |
|
BMS Leakage Current |
≤3mA |
|
Operating Temperature |
Charge: 32°F (0°C) to 131°F (55°C) |
|
Discharge: -4°F (-20°C) to 131°F (55°C) |
|
|
Storage Temperature |
1 Week: -4°F (-20°C) to 122°F (50°C) |
|
1 month: -4°F (-20°C) to 113°F (45°C) |
|
|
6 months: -4°F (-20°C) to 104°F (40°C) |
|
|
Humidity |
Operating: 5% to 90 % RH Storage: 45% to 85% RH |
|
Certifications |
UN 38.3; CE |
|
Cycle Life |
≤1500 @ 100% Depth of Discharge; ≥3000 @ 80%; ≥4500 @ 30% |
|
Product Warranty |
10-year (Prorated) |
Product Safety Warnings
Dimensions & Other Specs |
|
|
Length |
12.9 in / 328 mm |
|
Width |
7 in / 178 mm |
|
Height |
9.2 in / 233.7 mm |
|
BCI Group # |
31 |
|
Weight |
36 lbs / 16.33 kg |
|
Carrying |
Nylon Straps |
Materials |
|
|
Case and Cover |
ABS |
|
Active |
LiFePO4 |
|
Venting Valve |
Rubber, opening pressure 8-20kPa |
Shipping & Handling Information
Lithium Iron Phosphate batteries ship under Class 9 Dangerous Goods PI 965 Section IA, which requires special carrier
instructions. Please contact your carrier company to determine their requirements for shipping.
MSDS Sheets are available upon request.Safety Precautions
Safety Precautions
Do not wire in series.
Maximum 4 batteries per bank in parallel.
Only suitable for 12-volt applications.
Do not get wet.
