Go Power

Purpose-built to make off-grid mobile power easy. 

Fast, Easy Installation
High Efficiency Power.
Customizable for your Unit
Compatible with 12/48V systems, and can be tailored to your application.
Complete. Tested. Supported.
Each PowerBoard™ is built to last.
Previous slide
Next slide

Solar Charge Controller

Get the most out of your solar system. The latest solar controller technology, PowerBoards™ have integrated MPPT solar charging.

Bluetooth® enabled controller remote display allows you to view and change essential power stats from your phone.

Pure Sine Inverter/Charger

The powerhouse of the system. An inverter, battery charger, and transfer switch in one convenient place.

Seamlessly switch from solar to shore power charging, and use the PowerShare feature to help start large loads.

Pre-Wired

Each PowerBoard™ has been pre-wired and tested to work "out of the box", with minimal connections.

Connect the battery on one end, solar and shore charging on the other. Fully fused with properly sized wires to optimize the power system.

Engineered for RVs

We don't take safety for granted, and neither should you. Your PowerBoard™ has been designed and purpose-built for life on the road.

From the products on it, to the wires connecting it all, and even the aluminum housing, the PowerBoard™ is built to last.

FAQ

The Go Power! IC Series 3000-watt Inverter Charger is a 3-in-1 system that combines an inverter, battery charger, and automatic transfer switch into one compact unit. It seamlessly switches between solar and shore power charging and is capable of delivering up to 3,000 watts of power. This device is a vital component in a power system, ensuring a continuous power supply by converting DC to AC power, charging the battery, and handling power transfers between different sources.

The 30 Amp MPPT Solar Controller plays a critical role in optimizing an RV’s solar charging system. It prevents overcharging of the batteries, maintains battery life, and ensures efficient charging by adjusting to varying sunlight and tilt conditions. This controller is essential for managing the flow of current from the solar panels to the battery banks, ensuring they are charged appropriately and protecting them from damage due to overcharging.

The GP-RVC-R remote display offers a user-friendly touchscreen interface along with mobile app support. It is used to conveniently set and monitor important charge information for GP-RVC-MPPT photovoltaic (PV) charge controllers, providing users with essential data such as charge current to the battery and battery voltage for their solar charging system.

Using the PowerBoard is designed to be straightforward, ensuring a hassle-free experience. Here’s a step-by-step guide on how to use it effectively:

  1. Initial Setup: The PowerBoard system is pre-wired and configured for your convenience. In most cases, there’s little to do unless you are putting it in or out of storage, optionally disconnecting loads for off-grid use, or need to replace a blown fuse or reset a tripped breaker.
  2. Battery Configuration: If you selected your battery at the time of purchasing your RV, you may need to configure the PowerBoard. 
  3. Wiring Schematic: For troubleshooting or any configuration adjustments, you can find the wiring schematic located close to the PowerBoard. 
  4. Digital Resources: Scan the QR code located on the PowerBoard itself to access a digital copy of the user manual and wiring schematics. These resources offer detailed information for reference and troubleshooting.
  5. Monitoring: To monitor your power system conveniently from a single location, you can use the Go Power touch screen display or your RV’s OEM multiplexing system.

By following these simple steps and utilizing the available resources, you can effectively use the PowerBoard to enhance your RV’s power management.

If your system is not working correctly, please reach out to our customer support team for assistance. You can contact us through the following methods:

Phone (Toll-free in the US & Canada): 1.866.247.6527

Hours of Operation: Monday to Friday: 8:00 am – 4:00 pm PST. Closed for statutory holidays.

Alternatively, you can fill out our contact form at https://gopowersolar.com/contact-go-power/ and select the “Contact Customer Service” option on the form.

Each PowerBoard can be customized to a manufacturer’s specifications. Contact our sales team to get yours quoted for your next build. You can contact us through the following methods:

Phone (Toll-free in the US & Canada): 1.866.247.6527

Hours of Operation: Monday to Friday: 8:00 am – 4:00 pm PST. Closed for statutory holidays.

Alternatively, you can fill out our contact form at https://gopowersolar.com/contact-go-power/ and select the “Contact Corporate Sales” option on the form.

Product Support

Do you have questions? Is your PowerBoard™ not working as it should? Or do you want to discuss this product with a Go Power! solar expert? Reach out to us using the button below.